Answers are grounded in this paper and cite their sources.
The production of a hydrogen-rich gas by the acetic acid steam reforming using various kaolin-based catalysts (Ni, Co, and Ni-Co) was investigated. Kaolin was treated by a process of calcining at a temperature of 900 °C for a duration of six hours. Ni, Co, and Ni-Co catalysts containing 10–30 wt.% of active metals were prepared via the wet impregnation technique, utilizing kaolin as the support material. The support material and catalysts were characterized using XRF (X-ray Fluorescence), TGA (Thermogravimetric Analysis), BET (Brunauer-Emmett-Teller), XRD (X-Ray Diffraction), SEM (Scanning Electron Microscopy), and FT-IR (Fourier Transform Infrared Spectroscopy). Determination of catalyst activity was performed in a continuous flow reactor. The effect of temperature on catalyst activity (500–800 °C) was investigated. Gas chromatography (µ-GC) was used to determine the composition of the product gas. The effect of kaolin treatment (treated and untreated kaolin), catalyst type (Ni/Kaolin, Ni/Kaolin*, Co/Kaolin, Ni-Co/Kaolin), and active metal ratio in bimetallic catalysts (10–30% by mass), were studied. The maximum hydrogen yield achieved was 68.2% at 700 °C with a Ni/Kaolin catalyst. The experimental results indicate that kaolin has the potential to be used as a support material.
No takes yet. Share an insight, caveat, or question.
Dumlu et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: