Assessment of Injection Modeling Techniques for a Water Spray Using an Euler/Lagrange Approach

In the context of aircraft engine technologies, sprays are used to inject water into the engine cycle to enhance efficiency and reduce emissions. Accurate specification of droplet injection boundary conditions is therefore essential for reliable numerical predictions. This study presents a numerical validation of a water spray configuration previously characterized using phase Doppler anemometry. An Euler/Lagrange approach is applied to simulate the spray using two distinct injection strategies: an array of injector points (Case 1) and a solid-cone injector (Case 2). Numerical results are compared with experimental data to assess droplet size and velocity distributions. Both approaches capture the main spray characteristics, while Case 1 provides improved agreement due to a more accurate representation of the injection conditions. In addition, the influence of droplet–droplet collisions is investigated using different collision-regime maps. While the collision models lead to significantly different collision outcomes, only minor differences are observed in spray characteristics, with noticeable deviations occurring in the downstream region. Overall, the results demonstrate the importance of accurate injection modeling for reliable spray predictions, while simpler injection approaches remain viable with reduced accuracy. The influence of collision modeling is limited under the present conditions and for the investigated spray metrics, providing insight into its role and limitations in polydisperse sprays.