Answers are grounded in this paper and cite their sources.
Evaluates density effects on rutting and cracking in asphalt mixes, suggesting better BMD alignment.
Current Superpave asphalt mix design requires a fixed 96% lab-molded density. However, plant-produced mixes contain more fines, which elevate this density. To satisfy this requirement, contractors frequently reduce binder contents, producing drier mixes with lower cracking resistance and undermining the design intent. This constraint hinders balanced mix design (BMD) implementation. As elevated fine and binder contents primarily drive higher lab-molded densities in plant production, this study evaluated their effects on rutting, cracking, and skid resistance through laboratory and field testing of both lab- and plant-produced mixes. The laboratory phase included the Hamburg wheel tracking test, IDEAL rutting test, overlay test, and IDEAL cracking test on three Superpave mix types. The field phase evaluated nine test sections using the same laboratory tests, the Dynamic Friction Test, and field surveys. Results show that lab-molded densities up to 97%, when increased through higher fine contents reflecting plant conditions, preserve or enhance cracking resistance without compromising rutting or skid resistance. Conversely, density increases from higher binder contents promote rutting. These findings support adopting a performance-based lab-molded density range of 96%–97%, achieved through fine content variations consistent with field production, to better align with BMD principles and improve pavement durability.
No takes yet. Share an insight, caveat, or question.
Chan et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: