Answers are grounded in this paper and cite their sources.
Develops a wave-seepage model for better well-test interpretation in fractured-vuggy carbonate reservoirs, indicating implications for reservoir management.
Fractured–vuggy carbonate reservoirs are characterized by highly discrete storage structures, and the number, spatial distribution, and volume of cavities strongly affect well-test responses and reservoir development decisions. This study develops a PEBI-grid finite-volume implementation of a wave–seepage-coupled model for pressure-transient interpretation in reservoirs containing irregular cavities. The objective is not to introduce a new general-purpose finite-volume method but to embed irregular cavities as special control volumes into a locally orthogonal PEBI grid so that the cavity volume, geometry, and well–cavity distance can be represented explicitly in bottom-hole pressure calculations. The model is formulated as a thickness-averaged two-dimensional system in which the fracture–matrix region is treated as an equivalent seepage continuum, and each cavity is assigned a spatially uniform pressure governed by a wave–seepage exchange relation. For the limiting case of zero cavity volume, the numerical bottom-hole pressure agrees closely with the analytical solution and the material-balance estimate. A further cylindrical-cavity benchmark against an analytical wave–seepage solution gives a pressure-drawdown relative L2 error of 4.38%, where the relative L2 error denotes the Euclidean norm of the pressure error vector normalized by that of the reference solution, providing additional validation of the cavity-coupled formulation. Sensitivity analysis shows that increasing the cavity volume delays the characteristic extrema of the pressure derivative and strengthens the contrast between the minimum and maximum, whereas increasing the well–cavity distance mainly shifts the onset of the cavity-dominated response and weakens its amplitude. A field pressure-buildup case from the Fuyuan oilfield is interpreted using the proposed workflow. The matched model indicates a pentagonal cavity with a volume of 169,770 m3, a well–cavity distance of 158.4 m, a permeability of 5.535 md, and an initial reservoir pressure of 86.66 MPa. The results demonstrate that the proposed PEBI-FVM wave–seepage-coupled model can support practical well-test interpretation of irregular cavities, while its reliability depends on the validity of the equivalent-continuum and uniform-cavity-pressure assumptions.
No takes yet. Share an insight, caveat, or question.
Yan et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: