Answers are grounded in this paper and cite their sources.
Reveals enhanced performance of core-shell catalysts with low iridium loading in green hydrogen production, indicating improved efficiency.
Reducing iridium loading in proton exchange membrane water electrolyzer anodes is essential to meet cost targets for large‐scale green hydrogen production. Here, we report a photodeposition‐based synthesis of TiO 2 @IrO 2 core‐shell catalysts with iridium contents as low as 10 wt%. The influence of annealing temperature, iridium content, and iridium loading on structural and electrochemical properties is systematically investigated. An annealing temperature of 450 °C provides the best compromise between activity, conductivity, and stability. Remarkably, even at 10 wt% Ir (≈4.5 vol% IrO 2 ), the core‐shell architecture maintains high electronic conductivity and mass activity. The low iridium content results in ~18 μm thick catalyst layers at a loading of 0.35 mg Ir cm −2 , corresponding to a high thickness factor of 52.0 ± 0.8 μm (mg Ir cm −2 ) −1 . Two‐dimensional, two‐phase performance modeling reveals that these thick catalyst layers improve electronic connectivity at low loadings, leading to higher catalyst utilization than a commercial reference. As a result, the core‐shell catalyst outperforms the reference in single‐cell measurements, achieving 1.77 V at 2 A cm −2 at a low loading of 0.31 mg Ir cm −2 . During 200 h durability testing, reversible degradation is observed, while irreversible losses remain on par with the reference and the core–shell structure is preserved.
No takes yet. Share an insight, caveat, or question.
Finger et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: