Answers are grounded in this paper and cite their sources.
Experimental investigation demonstrates wall shear stress reduction in a turbulent boundary layer using micro-blowing, suggesting its potential for flow control.
High-resolution particle image velocimetry is employed to investigate the interaction between the micro-blowing technique and a zero-pressure-gradient turbulent boundary layer (TBL). In quiescent air, the micro-blowing jet exhibits a stable near-wall low velocity region combined with a main region accelerating with increasing blowing ratio. In TBL, the micro-blowing produces evident velocity decrease in a range from the wall to the logarithmic region of the time-averaged velocity profile, which intensifies with increasing blowing ratio. At the same time, a velocity fluctuation enhancement also exists due to the mixing between the micro-blowing jet and TBL. A maximum reduction in the local wall shear stress coefficient of 50% is achieved at high blowing ratios, which decays rapidly downstream. In contrast, low blowing ratios yield a moderate wall shear stress reduction but are more sustainable in space. Downstream of the blowing region, a low-speed wake is produced, which shrinks in the spanwise direction when propagating downstream. The wake swings obviously at low blowing ratios and is more stable at high blowing ratios. Quadrant analysis reveals that an important mechanism of wall shear stress reduction by micro-blowing is the suppression of turbulent sweep events. However, at high blowing ratios, an overshoot of ejection events exists downstream, which compromises the wall shear stress reduction performance downstream of the blowing region. These results provide an overall understanding of the TBL affected by the micro-blowing with a large blowing ratio range of 0%–20%.
No takes yet. Share an insight, caveat, or question.
Yang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: