Answers are grounded in this paper and cite their sources.
Investigates fatigue behavior of Ni3Al alloys in thin-walled structures, indicating optimization implications.
To meet the increasing demands of aircraft engines for high thrust-to-weight ratios and elevated turbine inlet temperatures, turbine blades have been progressively designed with thin-walled structures. It has been demonstrated that the mechanical properties of Ni3Al-based single-crystal alloys (SXs) are highly sensitive to specimen thickness. In this study, the high-cycle fatigue behavior of [111]-oriented Ni3Al-based SXs with wall thicknesses of 0.3, 0.5, and 0.8 mm was systematically investigated under tensile–tensile loading conditions at 1000 °C. The results revealed that, as the wall thickness decreased, the fatigue life of the alloy significantly deteriorated, while the crack initiation site gradually shifted from the specimen interior toward the surface and near-surface regions. Furthermore, the fatigue failure mode transitioned from being dominated by internal defects to being controlled primarily by near-surface damage. Near-surface damage induced by high-temperature oxidation and geometric constraints was identified as the primary factor responsible for the degradation of the high-cycle fatigue performance of the SXs. In addition, the cyclic deformation behavior at 1000 °C was governed by the synergistic effects of dislocation climb, cross-slip, and γ′-phase shearing. This study provides both theoretical guidance and experimental evidence for the structural optimization of next-generation single-crystal turbine blades for advanced aircraft engines.
No takes yet. Share an insight, caveat, or question.
Ning et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: