Answers are grounded in this paper and cite their sources.
Compares root surface roughness in extracted teeth using sodium bicarbonate and glycine, suggesting air polishing is beneficial.
INTRODUCTION: Scaling and root planning (SRP) with hand instruments/powered instruments repeatedly cause irreversible root damage. Hence, the use of an airabrasive technology for the removal of plaque seems logical. This study compared the root surface roughness after using sodium bicarbonate and glycine powder with traditional SRP under scanning electron microscopy (SEM). METHODOLOGY: A total of 105 extracted teeth were divided into 3 groups. Group 1 (control = 35) constituted SRP using ultrasonics, Group 2 ( n = 35) used sodium bicarbonate prophy powder, and Group 3 ( n = 35) used glycine powder as an air polishing agent. Acrylic blocks were prepared, and each sample was mounted in the acrylic block to leave one surface of the root exposed. The analysis was performed by profilometer and root surface morphology by scanning electron microscope, in vitro . RESULTS: The median Ra (arithmetic average roughness), Rp (maximum peak height), Rq (root mean square roughness), and Rt (total height) values of Group 1 were the highest followed by Group 2 and then Group 3. The median Rmax values of Group 3 were the highest followed by Group 1 and Group 2. CONCLUSION: Glycine powder produced less root surface roughness compared to sodium Bicarbonate air polishing and scaling with ultrasonic scaler. SEM can be the preferred choice as it produces high resolution of surface morphology.
No takes yet. Share an insight, caveat, or question.
Kumari et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: