Answers are grounded in this paper and cite their sources.
Analysis investigates power flux of Scholte modes in CFRP plates, suggesting their utility for damage detection.
The use of carbon fiber reinforced plastic (CFRP) is being extended to marine structures, and its structural integrity must be ensured for safety. Therefore, this study investigates the potential of Scholte modes, which are nondamping modes of guided waves, for the nondestructive inspection of underwater CFRP plates. The Rayleigh-Lamb equations for a free plate are generalized, and the governing equations of guided waves are derived for an orthotropic CFRP plate immersed in water. The propagation properties of the excitable Scholte modes are revealed by solving the derived equation. First, it is observed that in the fiber (0°) direction, one symmetric and one anti-symmetric mode are excitable, whereas in the 90° direction that is perpendicular to the fiber, infinitely many modes can be excited. Furthermore, it is shown that, unlike in aluminum, where most power propagates in water at high frequency, a larger portion of power flux is confined within the plate in the CFRP case: approximately 35% in the 0° direction, 72% for the lowest modes in the 90° direction, and nearly 100% for the higher modes in the 90° direction. Owing to the superior confinement of the Scholte mode in CFRP plates, Scholte modes are inferred to be promising for damage detection, such as matrix cracks of the plate. This is in contrast to the case of aluminum, where the higher-frequency Scholte modes are not sensitive to cracks because of the lower confinement of the power within the plate.
No takes yet. Share an insight, caveat, or question.
Saito et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: