Answers are grounded in this paper and cite their sources.
Evaluates a polymer coating's effect on magnesium anode corrosion in batteries, indicating improved efficiency.
High Resolution Image Download MS PowerPoint Slide Magnesium-air batteries have drawn considerable attention for their potential high energy density and the abundance of magnesium. However, their practical application is restricted by the severe self-corrosion of the Mg anode in the aqueous electrolyte, which results in low energy efficiency and limited cycle life. A polymer membrane, polyvinylidene fluoride/poly(propylene carbonate)/magnesium(II) bis(trifluoromethanesulfonyl) imide [PVDF/PPC/Mg(TFSI) 2 ], was designed and synthesized on the magnesium surface to mitigate the self-corrosion and prevent direct contact between water and the magnesium surface. Owing to its porous structure, the membrane provides multiple pathways for magnesium ion transport. The PVDF/PPC/Mg(TFSI) 2 polymer layer enhanced corrosion resistance of the pure Mg anode. When employed as a protective layer on the magnesium anode, it suppressed the corrosion and decreased the discharge working voltage from 1.48 to 1.39 V at a current density of 1 mA cm −2, compared with commercial pure magnesium. The electrochemical performance of the polymer-coated Mg anode, the microstructure of the anode after discharge, battery performance, and the underlying discharge mechanism were investigated.
No takes yet. Share an insight, caveat, or question.
Liu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: