Answers are grounded in this paper and cite their sources.
Explores the effects of biomass blending on combustion efficiency in coal-fired units, suggesting environmental benefits.
A 1000 MW ultra-supercritical boiler was selected as the simulation subject, with coal as the primary fuel and biomass as the secondary fuel. In previous similar studies, most scholars treated pulverized coal and biomass as a blended single fuel for simulation calculations. However, in this research, independent coal and biomass injection systems were established within the boiler combustion system. By adjusting the biomass blending ratio and boiler load, changes in the velocity field, temperature field, and concentration field of various components within the furnace were analyzed. The results show that, compared with pure coal combustion, the maximum temperature inside the boiler decreases during co-firing, while the outlet temperature increases. As the biomass blending ratio rises, the temperature variation in the combustion chamber gradually diminishes. During co-firing, the volume fraction of CO at the boiler outlet remains relatively similar, while the volume fraction of CO2 increases significantly, contributing positively to improving combustion completeness. Meanwhile, NOₓ emissions decrease with an increase in the biomass blending ratio, reflecting the optimization effect of low-nitrogen biomass combustion and contributing to the reduction of NOₓ emissions. These findings indicate that blending biomass with coal for combustion can enhance combustion efficiency, improve combustion conditions, and provide new solutions for boiler heat recovery and environmental protection.
No takes yet. Share an insight, caveat, or question.
Jiang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: