Answers are grounded in this paper and cite their sources.
Demonstrates optimized trajectory reduces casing stress in inclined formations, highlighting improved safety.
Casing damage in deep inclined formations is a critical challenge due to complex in-situ stress environments. This study presents a trajectory optimization method based on comprehensive in-situ stress field analysis. A modified in-situ stress model integrating formation dip and azimuth was derived, followed by the establishment of a three-stage coordinate transformation system (global–formation–wellbore) to precisely map stress tensors. A plane-strain finite element model of the “formation-cement-casing” system was developed using MATLAB-COMSOL joint simulation to scan equivalent stress distributions across all spatial trajectories. Results indicate that casing stress follows an axisymmetric distribution relative to the formation azimuth, with significant stress concentrations occurring when the wellbore aligns with the maximum horizontal stress. The model was validated against analytical solutions and 3D simulations, yielding a computational error below 5.4% while significantly enhancing efficiency. Application in Well BD4303 within the Xinjiang oilfield demonstrates that optimizing the deep-section trajectory reduced maximum equivalent stress by 27% and increased the safety factor to 4.02. This research provides a robust theoretical framework for trajectory design and casing integrity management in complex structural regions.
No takes yet. Share an insight, caveat, or question.
Liu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: