Answers are grounded in this paper and cite their sources.
Investigates high-cycle fatigue in duplex stainless steel, indicating effects of microstructure and heat treatment.
Conventionally fabricated duplex stainless steels (DSSs) are well‐known for their good fatigue, corrosion, and combined fatigue/corrosion performance. In laser beam powder bed fusion (PBF‐LB/M), their fabricability and tensile behavior are increasingly studied, though literature highlights process‐induced defects and the need for heat treatment to transform the fully ferritic as‐built microstructure into a duplex (ferrite/austenite) state. Heat treatment can tailor grain size and reduce defects. This work investigates the interplay between microstructure and defects in tensile and torsional high‐cycle fatigue of PBF‐LB/M DSS. Three microstructures are examined: fully ferritic, fine‐grained 50/50 duplex, and coarse‐grained 50/50 duplex, with comparison to a hot‐isostatically pressed condition to assess defect effects. The austenite‐free microstructure is highly defects‐sensitive, whereas duplex structures show reduced sensitivity, particularly under torsion. Fine grains enhance fatigue strength in both loading modes. These findings demonstrate how additive manufacturing‐enabled microstructural design mitigates defect‐sensitivity and inform heat treatment strategies for improved fatigue performance.
No takes yet. Share an insight, caveat, or question.
PIRAS et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: