Answers are grounded in this paper and cite their sources.
Evaluates SO₂ reduction in sulphuric acid plants, indicating improved environmental performance.
Sulphuric acid is the most widely produced bulk chemical in the world, with a continuously increasing demand over the years. Driven by stringent regulations, the sulphuric acid production process has seen broader implementation to restrain the release of sulphur dioxide (SO₂) emissions into the atmosphere due to the associated health concerns and environmental impact. The sulphuric acid plant industry has reached a high level of maturity and has consistently pursued advancements in the adopted technologies, but the currently used double contact double absorption (DCDA) process still vents SO₂ to the atmosphere. The present work introduces a novel approach to enhance SO₂ removal using oxygen-enriched air. Aspen Plus software was used to model and simulate the DCDA process to assess the plant’s performance using rate-based reactor models to minimize overall SO₂ emissions by manipulating dioxygen (O₂) quantities in the combustion air. The objective was to evaluate the extent of SO₂ emission reduction and to determine the optimal oxygen concentration in the combustion air that maximizes environmental performance while limiting the hazards associated with oxygen enrichment. Obtained results demonstrated a significantly enhanced overall SO₂-to-H₂SO₄ conversion efficiency, reaching 99.99% across the entire DCDA process, which resulted in SO₂ emissions substantially lower than those achieved by the current Best Available Techniques. Simulation results were verified by a well-established graphical method, and its findings confirmed the improvement levels predicted by Aspen Plus.
No takes yet. Share an insight, caveat, or question.
Elouaer et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: