Answers are grounded in this paper and cite their sources.
Shows improved energy density and lifetime in lithium-ion batteries with hybrid anodes, suggesting a new approach to battery design.
Anode-less batteries are one of the most promising technologies to increase the energy density of lithium-ion batteries (LIBs). However, compared to conventional LIBs with graphite anodes, they tend to degrade much more rapidly. To balance energy density and lifetime, we propose a hybrid anode where part of the energy is stored by the lithiation of graphite and part by plating Li on graphite. Without special measures, the latter leads to accelerated capacity loss, which we address here by coating the graphite with a thin lithiophilic SiOx/C layer using a scalable sol-gel process. By tuning the thickness of the SiOx/C layer and modifying a localized high concentration electrolyte, we achieved a long-term balance in hybrid anodes, simultaneously realizing a highly reversible Li plating/stripping while preserving high-capacity contribution from graphite intercalation with a considerable Li plating contribution (1/3). Overall, this results in hybrid anodes with a specific capacity of 584 mAh g-1 and capacity retention of 86 % over 500 cycles in a full cell versus NMC532 with an N/P ratio of 0.67. This far exceeds the 372 mAh/g theoretical capacity of graphite while at the same time doubling the lifetime compared to the best anode-less batteries reported to far.
No takes yet. Share an insight, caveat, or question.
Ruhan et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: