Recrystallization is a phenomenon in which a plastically deformed polycrystalline microstructure with a high dislocation density transforms into another that has low dislocation density. This evolution is driven by the stored energy in dislocations, rather than grain growth driven by grain boundary energy alone. One difficulty in quantitative modeling of recrystallization is the uncertainty in material parameters, which can be addressed by integration of experimental data into simulations. In this work, we compare simulated static recrystallization dynamics of a Mg – 3Zn – 0.1Ca wt% alloy to experiments involving thermomechanical processing followed by measurements of the recrystallization fraction over time. The simulations are performed by combining PRISMS software for crystal plasticity and phase-field models (PRISMS-Plasticity and PRISMS-PF, respectively) in an integrated computational materials engineering framework. At 20% strain and annealing at 350 °C, the model accurately describes recrystallization dynamics up to a mobility-dependent time scale factor. While the average grain boundary mobility and the fraction of plastic work converted into stored energy are not precisely known, by fitting simulations to experimental data, we show that the average grain boundary mobility can be determined if the fraction of plastic work converted to stored energy is known, or vice versa. For low annealing temperatures, we observe a discrepancy between the model and experiments in the late stages of recrystallization, where a slowdown in recrystallization kinetics occurs in the experiments. We discuss possible sources of this slowdown and propose additional physical mechanisms that need to be accounted for in the model to improve its predictions.
Montiel et al. (Wed,) studied this question.