PulseExploreJournal ClubDebatesTrendingResearchersJournals
Instagram
HomeExploreJournal ClubTrending
Synapse
⌘+K
Synapse
June 26, 2026Molecules0 citationsOpen Access

Detection of Essential Oil Adulteration Using High-Temperature Gas Chromatography with a Flame Ionization Detector

View Full Paper
MFMichal FulínRKRóbert KubinecJBJaroslav Blaško

Key Points

  • This research aims to create a method for detecting adulteration in essential oils using gas chromatography.
  • Developed HTGC-FID method for analysis of essential oils and their adulterants
  • Used on-column injection on a DB-5 capillary column
  • Validated method for linearity, repeatability, and sensitivity
  • Triacylglycerides found in some samples (up to 3.79%)
  • Other adulterants detected up to 52% in several products
  • Validation showed excellent sensitivity with LOQ of 0.03% for triacylglycerides

Abstract

Essential oils are natural products frequently subject to economically motivated adulteration with cheaper substances like vegetable oils, mineral oils, or organic solvents. This study developed and validated a rapid high-temperature gas chromatography with flame ionization detection (HTGC-FID) method for the simultaneous determination of high-boiling adulterants: triacylglycerides (vegetable oils) and medicinal white oil (mineral oil) in essential oils. The method utilizes on-column injection onto a DB-5 capillary column (30 m × 0.53 mm, 0.88 μm) with a temperature program from 60 to 380 °C and hydrogen carrier gas. Validation parameters demonstrated excellent linearity (R2 = 0.9957–0.9978), high repeatability (content RSD < 3%), and sufficient sensitivity (LOQ of 0.03% for triacylglycerides, and 0.63% for medicinal white oil). The method was successfully applied to 20 commercial essential oils. While medicinal white oil was undetected, several samples contained triacylglycerides (up to 3.79%) and other adulterants (up to 52%). Significantly reduced response factors confirmed extensive adulteration in some products. The proposed HTGC-FID method represents a simple, cost-effective, and efficient tool for routine quality control, enabling direct quantification of high-boiling adulterants without tedious sample preparation.

Ask AI
Helpful
Bookmark
Share
View Full Paper

Cite This Study

Fulín et al. (2026) studied this question.

synapsesocial.com/papers/6a3e1907030ad1a9b3091dd8https://doi.org/10.3390/molecules31132220
Ask AI
Helpful
Bookmark
Share
View Full Paper