Characterization of Particle Emissions from a DGEN 380 Small Turbofan Fueled with ATJ Blends

The fine particulate matter (PM) emitted from jet aircraft poses a serious threat to the environment and human health which can be mitigated by using biofuels. This paper aims to quantify PM emissions from a small turbofan fueled with the alcohol to jet (ATJ) synthetic kerosene and its various blends (5%, 20%, and 30% of ATJ) with Jet A-1 fuel. Emissions from a turbofan engine (DGEN 380) with a high bypass ratio, applicable in small private jets, were studied. Among the four fuels tested, the PM-number emission index (EIN) was the lowest for the ATJ 30% blend. EIN for ATJ 30% dropped from 1.1 × 1017 to 4.7 × 1016 particles/kg of fuel. Burning alternative fuel blends reduced the particle mass emissions over the entire range of fuel flow by at least 117 mg/kg of fuel. The particles formed in the nucleation mechanism dominate PM emission, which is characteristic of jet engines. Thus, number-based particle size distributions (PSDs) exhibit a single mode log-normal distribution. The highest values of EIN were found for Jet A-1 neat compared to other fuels. The use of the ATJ additive did not cause significant changes in the size of the particles from nucleation mode. However, a magnitude reduction of nucleation mode was found with the increase in the ATJ ratio.