Answers are grounded in this paper and cite their sources.
Demonstrates improved conductivity and flexibility in lithium superionic conductors, suggesting better performance for batteries.
All-solid-state lithium batteries (ASSLBs) offer improved energy density and safety over traditional liquid-electrolyte systems. However, their practical use is limited by the rigidity of inorganic lithium superionic conductors, which require impractically high stack pressures (>50 MPa) to maintain close solid–solid contacts during cycling. We introduce the idea of incorporating nonmetal-chlorine chemical bonds into the conductive network to make rigid conductors more flexible. Because nonmetal-chlorine chemical bonds (e.g., P–Cl, Si–Cl) exhibit low bond dissociation energies, they can undergo facile rotation and torsion, thereby facilitating Li + migration and framework deformability. A liquid SiCl 4 activation method is developed to introduce these chemical bonds, yielding a soft superionic conductor, Li 3 P 0.58 Si 1.25 Zr 1.78 Cl 10.86 O 3.58 . This material shows a high room-temperature Li + conductivity of 4.55 mS cm –1 and a low Young’s modulus of 2.09 GPa. This combination enables over 3000 cycles of ultrahigh-nickel cathode LiNi 0.92 Co 0.05 Mn 0.03 O 2 at a high current density of 3 mA cm –2, and even allows for stable operation of ASSLBs with no capacity decay after 300 cycles under a low stack pressure of 5 MPa, much lower than the usual 50 MPa needed for most inorganic superionic conductors. Additionally, this chemical-bond-tuning method works with various nonmetal centers (P, Si, C, S), providing a flexible strategy for designing deformable superionic conductors suitable for low-pressure ASSLBs.
No takes yet. Share an insight, caveat, or question.
Tan et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: