Answers are grounded in this paper and cite their sources.
Evaluates mechanical properties in resin composites, suggesting orientation impacts strength and hardness.
This study evaluated the effects of different printing orientations on the mechanical properties and surface roughness of a 3D-printed definitive resin-based composite (RBC) material. Bar shaped samples were fabricated from a 3D-printed RBC (VarseoSmile TriniQ) using three different build orientations (0°, 45°, and 90°) and lithium disilicate ceramic (IPS e.max CAD). Flexural strength and elastic modulus were evaluated using a three point bending test. Surface microhardness was assessed with a Vickers hardness test, and surface roughness was measured using a contact profilometer. Following mechanical testing, the sample surfaces and fractured regions were further examined by scanning electron microscopy (SEM) for topographic and fractographic evaluation. Statistical analysis was performed at α = 0.05 using one way ANOVA, with post hoc comparisons conducted using the Tamhane test. Significant differences were observed among the tested materials for all evaluated parameters (p < 0.001). IPS group demonstrated superior mechanical properties and lower surface roughness compared to the 3D-printed RBCs. Within the 3D-printed groups, the 0° build orientation exhibited higher flexural strength, whereas the 90° orientation showed increased surface hardness. Elastic modulus and surface roughness were not significantly influenced by printing orientation (p > 0.05). SEM analyses supported the quantitative findings by revealing a homogeneous and compact microstructure in IPS group and orientation-dependent surface and fracture features in the 3D-printed RBC groups. IPS e.max CAD demonstrated superior mechanical performance. The 0° orientation improved flexural strength, while the 90° orientation enhanced surface hardness, suggesting that build orientation should be selected according to the intended clinical function.
No takes yet. Share an insight, caveat, or question.
Özer et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: