Answers are grounded in this paper and cite their sources.
Investigates surface roughness with multi-acid etching in polymer-infiltrated ceramics, suggesting efficacy for enhanced bonding.
Aims This study investigated the impact of a multi-acid etching solution, ZircosE (comprising HCl, HF, HNO3, and H2SO4), on a polymer-infiltrated ceramic network (PICN) material (VITA Enamic). The study also compared its performance with two conventional etchants across three different exposure times: one minute, 30 minutes, and 60 minutes. Methods Surface roughness was quantified, and microstructural changes were observed using scanning electron microscopy (SEM). Results The multi-acid etching solution consistently produced the highest surface roughness (from 0.672 ± 0.022 μm at one minute to 0.835 ± 0.023 μm at 60 minutes). SEM confirmed a progressive increase in surface porosity and particle removal with longer exposure, suggesting potential for enhanced micromechanical retention. Conclusions The multi-acid solution effectively roughened the PICN surface, demonstrating its potential as an alternative etching method. However, prolonged exposure risks over-etching and structural compromise.
No takes yet. Share an insight, caveat, or question.
Jurado et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: