Answers are grounded in this paper and cite their sources.
Demonstrates reduced corrosion in lithium batteries, implying improved performance and longevity.
Even with native aluminum oxide (Al 2 O 3 ) passive film, the aluminum (Al) current collector is susceptible to pitting corrosion and anodic dissolution under high voltage (>4.0 V vs. Li + /Li). Herein, a corrosion‐inhibiting binder (named as CSAP) with an ion‐hydrogen bond synergistic network is developed for 5 V‐class LiNi 0.5 Mn 1.5 O 4 (LNMO) batteries, the abundant carboxylate (─COO − ) on the backbone plays a key role in coordinating with Al 2 O 3 , resulting in a stable organic–inorganic hybrid interphase that effectively resists the attack of corrosive species generated from lithium salt. Minor current response is exhibited from the CSAP‐treated Al current collector compared with the poly(vinylidene fluoride) (PVDF) counterpart during 36 h chronoamperometry test, directly indicating the suppressed corrosion reactions. A similar conclusion can be arrived at from the lower content of corrosion mass loss in finite element analysis. Furthermore, the suppression of transition‐metal ion dissolution endowed by CSAP is verified through the structural retention observed in scanning transmission electron microscopy (STEM). Benefiting from these merits, a discharge capacity of 139.4 mAh g −1 is maintained in the LNMO/CSAP battery after 600 cycles at 1 C, compare with 109.7 mAh g −1 of the PVDF counterpart. More encouragingly, a discharge capacity of 108.1 mAh g −1 is exhibited for the LNMO/CSAP battery at 12 C.
No takes yet. Share an insight, caveat, or question.
Li et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: