Answers are grounded in this paper and cite their sources.
Demonstrates effective flow control in steel shot blasting for industrial applications.
Shot blasting is widely used in metal surface treatment, particularly in aerospace and automobile manufacturing to improve fatigue strength and extend service life. To achieve accurate measurement and control of steel-shot flow in pneumatic blasting, an integrated device combining sensing and regulation functions was developed. Based on electromagnetic field theory, the detection principles were analyzed and an equivalent model illustrating the magnetic field distribution was verified through finite element simulation. The detection unit uses an inductance-to-digital converter to acquire flow-related signals from an inductor-capacitor (LC) parallel resonant circuit. A periodic averaging filter is applied to suppress pulse-width modulation (PWM)-synchronous fluctuations caused by valve actuation. The control unit then uses a proportional-integral-derivative (PID) algorithm to regulate the PWM duty cycle of the solenoid valve. Experimental results show an approximately linear relationship between the LC resonant frequency shift and the one-minute accumulated mass of S330 and S110 steel shots. Under the tested conditions, the relative average deviation did not exceed 2.5% for S330 and 4.33% for S110 in the selected operating ranges. These results verify the feasibility of the proposed inductive measurement and closed-loop control method for steel shot flow regulation.
No takes yet. Share an insight, caveat, or question.
Liu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: