Answers are grounded in this paper and cite their sources.
Assesses effective photon energies and correction factors in radiotherapy, indicating the need for accurate out-of-field measurements.
BACKGROUND: In photon external beam radiotherapy, out-of-field doses resulting from photon scattering and leakage are unavoidable and may contribute to radiation-induced side effects.However, modern treatment planning systems are not commissioned to accurately estimate doses outside the treatment field. This underscores the need for dedicated experimental protocols for accurate measurements. Radiophotoluminescent glass dosimeters (RPLGDs) are well suited for this task due to their low detection threshold. Yet, because they are energy dependent, beam quality calibration is required. PURPOSE: To experimentally measure effective energies of photons outside the treatment field and to define beam quality correction factors for the GD-302M and GD-352M RPLGDs to be used in out-of-field dosimetry. METHODS: A solid phantom was assembled using water-equivalent plates. GD-302M and GD-352M RPLGDs were positioned at various distances from the beam central axis (0, 10, 20, 30, and 40 cm), at different depths (1, 10, and 15 cm), and for multiple field sizes (5, 10, and 15 cm). The experiment was repeated using a PTW30010 ionization chamber. Different beam qualities were tested, including 6 and 18 MV photon beams from an Elekta VERSA HD and 6 and 20 MV photon beams from a Varian Clinac 2300 CD. The GD-302M and GD-352M signal ratio was used to deduce the out-of-field photon effective energies. RESULTS: Across all beam qualities and configurations tested, effective energies ranged from 180 keV to 1302 keV. Beam quality correction factors for GD-302M RPLGDs varied between 0.804 and 1.197, while for GD-352M they ranged from 0.508 to 1.509. CONCLUSIONS: In this work, we determined experimentally effective photon energies outside the treatment field. We developed a methodology to establish out-of-field distance-dependent beam quality correction factors for RPLGDs. The results demonstrate the need to take into account those correction factors to ensure accurate out-of-field dose measurements.
No takes yet. Share an insight, caveat, or question.
M’hamdi et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: