Key points are not available for this paper at this time.
This paper presents a new control scheme for the problem of a space manipulator after capturing an unknown target, such as space debris. The changes in the dynamics parameters of the system, as a result of capturing an unknown target, must be accommodated because they may lead to poor performance of the trajectory control and attitude stabilization system. To address this issue in the postcapture scenario, the adaptive reactionless control algorithm to produce the arm motions with minimum disturbance to the base is proposed in this study. In addition, the online momentum-based estimation method is developed for inertia-parameter identification after the space manipulator grasps an unknown tumbling target with unknown angular momentum. This control scheme is intended for use in the transition phase from the instant of capture until the unknown parameters are identified and/or the available stabilization methods can be applied properly. To verify the validity and feasibility of the proposed concept, MSC.Adams simulation platform is employed to implement a planar base–manipulator–target model and the three-dimensional model of the Engineering Test Satellite VII system. The numerical results show that the space manipulator is able to perform reactionless motion while the inertial parameters converge to their real values.
Nguyen-Huynh et al. (Tue,) studied this question.