Answers are grounded in this paper and cite their sources.
Shows improved corrosion resistance in Al-Li alloy, indicating potential for increased durability.
The 2A97 Al‐Li alloy is widely utilized in aerospace because of its excellent mechanical properties. However, when the alloy is exposed to a moist climate, its service life is seriously affected by surface corrosion. To address the issue, a superhydrophobic surface with enhanced corrosion resistance was successfully developed on the 2A97‐T3 Al‐Li alloy by constructing HCl/FAS composite structures. The alloy was etched in a 5 mol/L HCl solution for 8 min, and then it was immersed in boiling water for 30 min. Finally, the alloy was soaked in a 0.1 mol/L perfluorodecyltriethoxysilane (FAS‐17) solution for 2 h. The low‐adhesion coating of a water contact angle was 152.7°, and the rolling angle was 5.64°. The corrosion resistance of the modified alloy was significantly improved compared to the original alloy. Specifically, the corrosion potential increased from −0.732 to −0.408 V, and the corrosion rate decreased dramatically from 3.322 × 10 −8 to 3.917 × 10 −9 A/cm 2 . The surface activity of the 2A97 Al‐Li alloy was reduced by these modifications. An innovative and effective method was provided to improve the corrosion resistance of the Al‐Li alloy. It holds significant promise for extending the service life of Al‐Li alloys in moisture‐prone environments.
No takes yet. Share an insight, caveat, or question.
Luo et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: