Answers are grounded in this paper and cite their sources.
Investigates airflow effects on thermal uniformity in a pumped-storage generator-motor, suggesting design optimization.
This study investigates the effects of upper-to-lower inlet-airflow asymmetry on airflow redistribution and thermal nonuniformity in a fully air-cooled pumped-storage generator-motor with a laminated rotor yoke. A full-axial-length computational sector covering three rotor poles was established, and a conjugate heat-transfer model incorporating the multiple reference frame approach and the RNG k-ε turbulence model was developed. The effects of the upper-to-lower inlet-airflow ratio (Q1/Q2=1.0–3.0) on airflow redistribution at the rotor-yoke ventilation ducts, the spatial correlation of inlet airflow at the stator radial ventilation duct inlets, and the field-winding temperature distribution were analyzed. The results show that the airflow variations at the rotor-yoke duct outlets remain within 5% when Q1/Q2≤1.4, and the entropy-weighted fluctuation index Fi increases approximately linearly with Q1/Q2 for Q1/Q2≤2.8. The inlet airflow rates at the stator radial ventilation duct inlets maintain positive global spatial autocorrelation under all investigated conditions, whereas the axial symmetry of the local Moran’s index is disrupted when Q1/Q2>1.5. For the present machine, the measured upper-to-lower inlet-airflow ratio is approximately 1.32. Compared with the uniform-airflow condition, the measured nonuniform-airflow condition results in only a slight change in the average field-winding temperature but leads to a markedly more asymmetric temperature distribution. In particular, the hot-spot displacement toward the low-airflow side increases from 0.03 m to 0.10 m, and the regional temperature-distribution difference index increases in all investigated regions. These results clarify how upper-to lower inlet-airflow asymmetry causes airflow redistribution and subsequently distorts the temperature field and provide guidance for ventilation-cooling design optimization.
No takes yet. Share an insight, caveat, or question.
Li et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: