Answers are grounded in this paper and cite their sources.
Compares compressive strength and shrinkage of low-carbon cementitious materials from solid wastes, indicating their potential use.
Low-carbon cementitious materials (LCMs) produced from multi-source solid wastes have attracted growing interest because of their environmental advantages and low cost. However, cementitious systems composed entirely of solid waste often exhibit insufficient reactivity and poor stability, which restricts their practical application. In this study, cement, ground granulated blast-furnace slag, fly ash, and gypsum were selected as raw materials. Components of the solid waste were mechanically activated to prepare the LCMs containing 15% cement. Its performance was compared with that of a pure cement system and a full solid-waste system. The results indicate that, in the LCMs, the alkaline environment generated by the hydration of a small amount of cement effectively drives the continued hydration and polymerization of the activated components. Consequently, the LCMs mortar samples achieves a compressive strength of 42.1 MPa at 28 days. The autogenous shrinkage reaches + 782 με at 3 days, and the drying shrinkage is −0.101% at 21 days, the LCMs mortar sample demonstrating excellent later-age strength development and favorable shrinkage behavior. Hydration kinetic analysis of the paste samples shows that the theoretical heat release of the LCMs is lower than that of ordinary cement, while the hydration lasts longer and follows the kinetic model of nucleation and growth-phase-boundary reaction-diffusion (NG–I–D). Microstructural and phase of the paste samples analyses reveal that hydration mainly forms low-coordination C(–A)–S–H gel and ettringite (AFt). These products provide the microstructural basis for the high compressive strength and improved shrinkage performance. This study compares the macroscopic properties and microscopic mechanisms of cement, LCMs, and full solid-waste cementitious materials. The results provide a scientific basis for the wider application of LCMs derived from multi-source waste sources.
No takes yet. Share an insight, caveat, or question.
Wen et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: