Answers are grounded in this paper and cite their sources.
Demonstrates improved particle classification in sandy alumina precursors, suggesting a new processing approach.
Aluminum hydroxide prepared from diaspore bauxite typically suffers from small particle sizes and a broad size distribution. Calcining this precursor yields powdery alumina, which is difficult to meet the particle size requirements of the electrolytic aluminum industry for sandy alumina (where particles ≥ 80 μm account for > 90 %). However, when classifying aluminum hydroxide, conventional hydrocyclones suffer from severe fine particle entrainment in the underflow. To address this issue, this study proposes a multi-inlet stepped hydrocyclone. This hydrocyclone combines a multi-inlet structure equipped with a slurry distributor and a stepped cylindrical section. Specifically, the multi-inlet distributor enables the solid materials to form a relatively uniform concentration profile in the upper cylindrical section. Meanwhile, the stepped structure utilizes the local velocity gradients and high-shear flow fields generated at the geometric abruptions to facilitate the breakage of aluminum hydroxide agglomerates, thereby alleviating fine particle entrainment. Optimization experiments on geometric and operational parameters indicate that the multi-inlet double-stepped hydrocyclone achieves a coarse particle (≥ 80 μm) mass percentage of 87.57 % and a solid concentration of 1489.93 g/L in the underflow. In the industrial side-stream trial, the coarse particle mass percentage was further elevated to 92.17 %. Therefore, this study provides a practical process approach and valuable reference for preparing high-quality, narrow-size-distribution sandy alumina precursors.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: