Answers are grounded in this paper and cite their sources.
First-principle calculations explore carrier efficiency and Fermi-level behavior in 2D β-TeO₂/metal structures, suggesting design improvements.
Two-dimensional (2D) semiconductor β-TeO₂ based Field-effect transistors (FETs) have attracted considerable attention in the field of microelectronic devices owing to their high on/off ratio (>10⁶), low subthreshold swing (<60 mV/dec), and small effective hole mass (0.51 mₑ). The contacts between the β-TeO₂ semiconductor and metals are critical for enabling multifunctional device design. Here, we employed the first-principle calculation to investigate physical properties of contacts between 2D monolayer β-TeO₂ and a series of metals T/H-XA₂ (X = V, Nb, Ta, and A = S, Se). The tunable sensitivity of the Schottky barrier to metal work function and the charge carrier injection efficiency with varying interlayer distance were systematically investigated. At the equilibrium interlayer distance, the contact approaches the ideal Schottky-Mott limit with Fermi-level pinning (FLP) factor |S|≈1. However, the tunneling probabilities for these contacts are low, varying from 0.12% for the contact with NbS2 to 4.17% for the contact with VS2. Decreasing the interlayer distance to 2.0 Å leads to an increase in tunneling probability to 17.25% for the NbS₂ contact and 49.60% for the VSe₂ contact. However, the Fermi-level pinning (FLP) factor S decreases to 0.42 for electrons and 0.52 for holes, indicating enhanced Fermi-level pinning effects due to increased metal-induced gap states (MIGS). Thus, optimizing the interlayer distance to balance carrier injection efficiency and Fermi-pinning effects is crucial for high-performance FETs. These findings provide a theoretical basis for the further design and fabrication of high-performance TeO₂ based transistors in the future.
No takes yet. Share an insight, caveat, or question.
Lu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: