Answers are grounded in this paper and cite their sources.
Examines how copper fibres and tin powder affect ABS degradation, suggesting additives impact properties significantly.
The subject of this research concerns the composites with a poly(acrylonitrile–butadiene–styrene) (ABS) matrix containing copper fibres and tin powder in varying proportions, while maintaining a constant total filler content of 25 vol%. The samples were produced by extrusion with granulation, followed by hot pressing. Composites containing these fillers become sufficiently conductive in laser-modified areas to enable direct electroplating, as described in an earlier publication [ 11 ]. However, the present study focuses on the effect of the applied functional additives (copper fibres and tin powder) on ABS degradation processes. To this end, the oxidation onset temperature (OOT), oxidation induction time (OIT) were determined, and thermogravimetric analysis (TGA) under nitrogen or oxygen atmospheres was performed. In addition, the samples were subjected to a simplified aging procedure by conditioning them for 48 h at 120 °C with free access to air. Based on Fourier transform infrared spectroscopy (FTIR), the main changes in the chemical structure of ABS and their impact on mechanical properties were identified. All tests consistently indicate that copper fibres have a greater effect on ABS degradation than tin powder.
No takes yet. Share an insight, caveat, or question.
Rytlewski et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: