Answers are grounded in this paper and cite their sources.
Analyzes constituent phases in tungsten heavy alloys, indicating significant findings for binder element content.
Tungsten heavy alloys are liquid phase sintered two-phase materials in which tungsten grains are embedded in an austenitic Ni-base matrix. While the solubility of W in the binder is high, the solubility of the binder elements in the W phase is very low. Analysis of the binder phase is challenging because of the dominating signals of the W phase. It is shown that treating heavy alloy sections or chips in aqueous [Cu(NH3)4]SO4 solution removes the W phase to a certain depth or even completely. In metallographic sections, removal of W to a depth of just a few grain diameters dramatically increases the signals from the binder in XRD and other surface analysis techniques. Long time etching of chips completely removes the W phase, and the binder can then be quantitatively analyzed, e.g. by ICP-OES or ICP-MS, which is particularly interesting for determining the W content in the binder. For analyzing the Ni and Fe contents in the W phase, LA-ICP-MS has been employed, using specifically prepared low-binder specimens for calibration. It showed that the binder element content is in fact significantly lower than presented in the literature, approx. 340 µg/g for Fe and 60 µg/g for Ni.
No takes yet. Share an insight, caveat, or question.
Marschnigg et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: