Answers are grounded in this paper and cite their sources.
Experimental research investigates methane hydrate growth and morphology at varied conditions, suggesting complex formation mechanisms.
Experimental research into methane hydrate film growth on the water surface was conducted at various pressure (85 ± 5 bar) and temperature (−9 °C to 8 °C) values. Hydrate films were found to have an uneven surface in all the cases under consideration. Hydrate film growth rates were found to vary from 0.035 to 1.40 mm/s under different ambient conditions. Different mechanisms of methane hydrate formation, depending on the degree of supercooling, were identified. At a low degree of supercooling (1.7 °C), the gas hydrate film growth front moved forward steadily most of the time, with short rare surges, accompanied by changes in the film surface. As the supercooling increased, the methane hydrate film growth was similar to the first case in terms of steady front movement but without any surges. At maximum supercooling (∼20°C), methane hydrate formation was a multistage process. A primary film, presumably with a large number of defects, was formed first. Then agglomerates of secondary crystals of gas hydrates (bumps and ridges) were formed in the growth points (primary film defects) due to the capillary effect. Those agglomerated to form a film, effectively isolating the water phase from the gas. The front of the growing hydrate film was poorly wetted by water. It is probably a high concentration of methane (adsorption layer) on the growth face that makes the surface temporarily hydrophobic.
No takes yet. Share an insight, caveat, or question.
Sagidullin et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: