Answers are grounded in this paper and cite their sources.
Assesses mesh design impacts on accuracy in finite element modeling of thread-forming screws, indicating improvements in results.
Plastic deformation occurring in the forming process during the assembly of thread‐forming screw connections presents a significant challenge for accurate representation in finite element simulations. Among other parameters, the quality of results is largely influenced by the mesh design. With the intention of considering different meshing strategies of the nut component, this study examines the influence of mesh orientation, both straight and parallel to the thread helix, the mesh density, as well as the impact of mass scaling and Arbitrary‐Lagrangian‐Eulerian (ALE) adaptive remeshing operations. The quality of the results obtained was assessed by energy evaluations. Moreover, the size of the nut segment was investigated, revealing that a segment shaped by an angle of 45° around the longitudinal axis is sufficient to accurately represent the forming process and produces similar geometric formations compared to a 360° model. Improvements in results were further achieved by using Arbitrary‐Lagrangian‐Eulerian remeshing operations and a locally refined mesh. Applying mass scaling on highly deformed parts has a large effect on reducing calculation time, simultaneously enlarging element density, which can lead to minor deformation of the nut thread.
No takes yet. Share an insight, caveat, or question.
Binder et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: