Answers are grounded in this paper and cite their sources.
Explores erosion characteristics of cavitation jets in hydrate-bearing sediments, suggesting insights for drilling applications.
The cavitation jet is regarded as a promising hydraulic rock-breaking technique for drilling and exploiting deep-sea natural gas hydrate (NGH). However, the detailed mechanisms of erosion pit formation in hydrate-bearing sediments (HBSs) under cavitation jet erosion remain unclear, and effective simulation methods are still limited. This study first conducts jet erosion experiments on HBSs using a convergent–divergent cavitation jet nozzle (CDCJ) and a conical jet (CJ) nozzle to evaluate the erosion performance of the CDCJ. The CDCJ is then applied to erode HBS specimens under different flow rates, erosion times, and stand-off distances, with the geometric characteristics of the erosion pits recorded. Subsequently, a coupled CFD-DEM framework is developed to further investigate the erosion process and mechanisms. Based on this model, the erosion characteristics of the cavitation jet at different stages and under varying jet parameters are analyzed and validated. The results show that the CDCJ exhibits a significantly stronger erosion capacity than the CJ, with the pit volume and depth reaching 1.36 and 1.19 times those produced by the CJ, respectively. The hole-forming process induced by the cavitation jet can be divided into three stages: the V-shaped hole-forming stage, the cylindrical hole-forming stage, and the spindle-shaped hole-forming stage. In the V-shaped hole-forming stage, jet impingement and the penetrating erosion of cavitation clouds dominate pit development. As erosion progresses, the axial impingement gradually weakens, whereas radial cutting decays more slowly. Meanwhile, vortices inside the pit trap cavitation clouds and promote further hole enlargement. Both the experiments and simulations indicate that higher flow rates produce larger and deeper pits, and a standoff distance of 5 mm is optimal for cavitation erosion. These findings clarify the hole-forming mechanism and flow-field evolution during the cavitation erosion of HBSs, and provide guidance for the application of the cavitation jet in NGH drilling and exploitation.
No takes yet. Share an insight, caveat, or question.
Wu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: