Answers are grounded in this paper and cite their sources.
Demonstrates improved strain estimation using a two-stage neural network framework, suggesting enhanced structural monitoring capabilities.
Estimating internal strain responses from boundary acceleration measurements remains a challenging problem in structural monitoring. This study proposes a two-stage neural network framework based on a shallow time-delay neural network (TDNN) to reconstruct internal strain responses using triaxial acceleration measurements from a single accessible boundary region. The proposed approach separates the acceleration-to-strain transformation into two sequential steps where acceleration is first used to estimate displacement, and the displacement response is then used to infer strain. This staged learning structure simplifies the mapping between structural responses and enables consistent reconstruction using a compact model trained on limited experimental data. The framework was validated through a rotary excitation experiment with a prediction duration of 242 s. When the measured and predicted strain signals were compared using the coefficient of determination ( R 2 ), the resulting values were strongly affected by phase drift that accumulated over time between the signals. After compensating for this phase difference using dynamic time warping (DTW), both models reproduced the overall strain waveform with approximately 93% similarity. In fatigue-related structural assessment, accurate estimation of strain peaks is particularly important because damage accumulation is dominated by peak amplitudes. The proposed 2-stage model improved the reconstruction of peak strain values by approximately 12% compared with the 1-stage model. Further frequency-domain analysis based on Fast Fourier Transform (FFT) revealed that the staged learning structure preserves peak-related high-frequency information, enabling more accurate reconstruction of rapid strain variations. These results demonstrate that localized internal strain behavior can be inferred from minimal boundary sensing and provide a practical pathway for data-efficient structural monitoring for fatigue evaluation and digital-twin-based structural assessment.
No takes yet. Share an insight, caveat, or question.
Seok et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: