Answers are grounded in this paper and cite their sources.
Experimental and simulation study demonstrates enhanced corrosion resistance in steel rebars using a novel coating.
This study presents a novel functionally graded (FGCs) coating materials designed to improve the corrosion resistance of steel rebars embedded in concrete exposed to aggressive chloride environments. A triple-layered Cu/Zn/Sn coating at the nanoscale is applied using a modified spray coating technique that integrates manufacturing efficiency with metallurgical bonding. Reinforced concrete specimens are exposed to a 3.5 wt.% NaCl solution for 28, 56, and 90 days at three different temperatures (298, 308, and 318 K) to assess long-term corrosion performance under simulated marine conditions. Comprehensive surface characterization is performed using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), atomic force microscopy (AFM), and microhardness testing. The results confirmed the formation of a dense, well-adhered protective layer with improved surface uniformity. Electrochemical tests, including Tafel polarization and electrochemical impedance spectroscopy (EIS), demonstrated a substantial improvement in corrosion resistance. At 298 K after 28 days of immersion, the coated samples exhibited a corrosion current density of 0.299 × 10⁻⁷ A/cm² and achieved a maximum inhibition efficiency of 97.92%. Additionally, the porosity percentage is extremely low at 1.29 × 10⁻⁷%. The EIS analysis supported these findings, revealing that the highest solution resistance is 21,521 Ω·cm². Furthermore, the coated steel exhibited enhanced mechanical properties, with surface hardness increasing from 195.8 HV (uncoated) to 221.4 HV. These results indicate that this FGM coating provides durable protection against chloride-induced corrosion, offering a practical and cost-effective solution for prolonging the life span and performance of reinforced concrete structures exposed to marine and de-icing environments. Notably, these findings aligned well with DFT-based simulations, which confirmed the coating’s thermal stability and chloride adsorption behavior at the atomic level.
No takes yet. Share an insight, caveat, or question.
Hameed et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: