Answers are grounded in this paper and cite their sources.
Investigates mechanical and thermal properties of biochar-reinforced composites, suggesting sustainable applications.
This study examines the influence of lemon peel-derived biochar on the mechanical, thermal, and physical properties of pineapple leaf fiber (PALF)-reinforced polyester composites. Alkali-treated PALF served as the primary reinforcement, while biochar, produced via slow pyrolysis at 500 °C and sieved to below 75 µm, was incorporated at 0, 5, 10, 15, and 20 wt.% using the hand lay-up method. Mechanical testing revealed that the composite with 10 wt.% biochar exhibited the highest performance, with hardness increasing from 72.133 Shore D in PALF-B0 to 77.040 Shore D in PALF-B10, tensile strength from 42.530 MPa to 52.317 MPa, flexural strength from 58.307 MPa to 68.807 MPa, shear strength from 24.163 MPa to 29.327 MPa, and impact strength from 3.733 kJ m −2 to 4.201 kJ m −2 . Thermal stability improved, with mass retention at 400 °C increasing from 27.58 % to 47.8 %. Water absorption decreased from 10.42 % to 7.88 % after 28 days. SEM analysis revealed uniform filler dispersion and strong fiber–matrix bonding at 10 wt.%, while higher loadings caused agglomeration and reduced properties. The findings identify 10 wt.% lemon peel-derived biochar as optimal, offering a sustainable method for converting agro-waste into high-performance, lightweight composites suitable for various engineering applications.
No takes yet. Share an insight, caveat, or question.
Muthusamy et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: