Empirical Effective Strain Model for CFRP Plates Bonded to Concrete Using the Externally Bonded Reinforcement on the Grooves

Externally bonded reinforcement (EBR) using fiber reinforced polymer (FRP) is one of the most widely used techniques for strengthening reinforced concrete (RC) structures. However, early debonding of the concrete surface layer in the EBR method limits its structural performance. Recently, the externally bonded reinforcement on grooves (EBROG) method has emerged as a promising alternative. This study experimentally investigates the bond behavior between CFRP plates and concrete strengthened using the EBROG method. A total of 78 specimens were fabricated and evaluated using single-lap shear tests. The investigated parameters include groove dimensions, number of grooves, and concrete compressive strength. A digital image correlation (DIC) system was used to measure displacement. Unlike the EBR method, no debonding of the concrete surface layer occurred in the EBROG specimens, and the bond strength improved by 49.56–154.48% without additional surface treatment. Increased groove dimensions and a greater number of grooves significantly enhanced the bond performance. Higher concrete compressive strength and larger groove dimensions also delayed the onset of debonding. Based on the experimental results, a new effective strain model was proposed, and flexural capacity predictions using this model showed higher accuracy than those obtained from existing models.