Answers are grounded in this paper and cite their sources.
Here, we demonstrated the fabrication of GaN, AlGaN, and AlN nanomembranes through a two-step nanoporous (NP)-assisted controlled spalling technique and utilized these nanomembranes to create flexible piezoelectric sensors. In this process, the first NP served as a seeding layer for overgrowing the planarized Al x Ga 1-x N layers, while the second NP acted as a separation layer. We conveniently peeled off the overgrown thin film nanomembranes at the interface of the second NP using a Ni stressor and thermal release tape. The crystal quality of the nanomembranes was confirmed through various characterizations, including electron microscopy, X-ray diffraction, and Raman spectroscopy. The inherent flexibility of the nanomembranes provided an opportunity to fabricate highly responsive piezoelectric sensors. The resulting flexible GaN and AlN membrane-based sensors exhibited exceptional sensitivity to pressure and bending-induced strain. Moreover, these devices easily detected human motion and airflow. The NP-assisted controlled spalling process is a controllable and scalable mechanical lift-off technique that opens up numerous possibilities for the development of innovative device applications. • Thin GaN buffer layer was adopted to grow additional GaN, AlGaN, AlN thin-film on nanoporous structure. • Al x Ga 1-x N nanomembranes were demonstrated through two-step nanoporous-assisted controlled spalling. • Flexible piezoelectric sensors were fabricated based on the nanomembranes. • The piezoelectric sensors were tested by using bending, finger tapping, finger bending, and air flow.
No takes yet. Share an insight, caveat, or question.
Min et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: