Key points are not available for this paper at this time.
A large electronically reconfigurable reflectarray antenna that has 160 × 160 reflecting elements was designed, fabricated, and evaluated so that it could be applied to a millimeter-wave imaging system operating in the 60-GHz band. To make it feasible to construct such a large reflectarray, the reflecting element structure had to be simple and easily controlled; therefore, a reflecting element consisting of a microstrip patch and a single-bit digital phase shifter using a p-i-n diode was employed. A large reflectarray antenna was fabricated using the reflecting elements. The measured radiation patterns and antenna gain were in good agreement with those that were calculated. Furthermore, the near-field beam focusing capabilities, which was required to image near-field objects, were also verified through an experiment. Finally, the response time for beamforming was measured, which was far less than the system requirements.
Kamoda et al. (Tue,) studied this question.