Answers are grounded in this paper and cite their sources.
Hopcalite catalysts are well established in the literature as highly active non-noble metal catalysts for low-temperature carbon monoxide (CO) oxidation under laboratory conditions, with practical industrial applications historically ranging from respiratory protection to CO removal from continuous and well-defined gas streams. For emission reduction in residential wood stoves, however, these catalysts must withstand prolonged hydrothermal and chemical stress while maintaining high activity. Therefore, the effect of hydrothermal aging and sulfur exposure on the CO oxidation performance of copper-manganese (Cu-Mn) oxide catalysts was systematically investigated. The catalyst, synthesized via co-precipitation, was aged at 400–550 °C for up to 484 h in the presence of water vapor. Structural and morphological changes were characterized by X-ray diffraction, electron microscopy, and N 2 physisorption, and correlated with catalytic activity measured in a laboratory reactor. Additionally, CO oxidation performance was evaluated in a residential wood stove using a custom-designed experimental setup. Aging at 400 °C, the initial CuMn 2 O 4 spinel and Mn 5 O 8 phases are largely preserved, accompanied by surface restructuring that enhances catalytic performance. In contrast, aging at T ≥ 500 °C induces a phase transformation to Mn 2 O 3 , accompanied by sintering and a loss of surface area, resulting in catalytic deactivation. Sulfur poisoning leads to a moderate increase in light-off temperatures, while mixed-gas experiments reveal pronounced competitive adsorption between CO and co-feed gases after prolonged aging. The results highlight the importance of controlled thermal exposure for maintaining catalyst activity under practical operating conditions.
No takes yet. Share an insight, caveat, or question.
Kale et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: