Key points are not available for this paper at this time.
In recent years, methods for detecting motor bearing faults have attracted increasing attention. However, it is very difficult to detect the faults from weak motor bearing signals under the strong noise. Stochastic resonance (SR) is a popular signal processing method, which can process weak signals with the noise, but the traditional SR is burdensome in determining its parameters. Therefore, in this paper, a new advancing coupled multi-stable stochastic resonance method, with two first-order multi-stable stochastic resonance systems, namely CMSR, is proposed to detect motor bearing faults. Firstly, the effects of the output signal-to-noise ratio (SNR) for system parameters and coupling coefficients are analyzed in-depth by numerical simulation technology. Then, the SNR is considered as the fitness function for the seeker optimization algorithm (SOA), which can adaptively optimize and determine the system parameters of the SR by using the subsampling technique. An advancing coupled multi-stable stochastic resonance method is realized, and the pre-processed signal is input into the CMSR to detect the faults of motor bearings by using Fourier transform. The faults of motor bearings are determined according to the output signal. Finally, the actual vibration data of induction motor bearings are used to prove the effectiveness of the proposed CMSR. The comparison results with the MSR show that the CMSR can obtain a higher output SNR, which is more beneficial to extract weak signal features and realize fault detection. At the same time, this method also has practical application value for engineering rotating machinery.
Cui et al. (Thu,) studied this question.