Answers are grounded in this paper and cite their sources.
Investigates hydraulic efficiency of pico-hydro turbines, indicating design improvements.
Indonesia’s vast hydropower potential remains significantly untapped, despite the relevance of low-head water resources for decentralised rural electrification. This study investigates the effect of the blade thickness ratio (L/H) of a centre-convex upper blade profile on the hydraulic performance of a pico-hydro crossflow turbine. The novelty of this work lies in isolating L/H as a manufacturable blade-profile variable and linking its influence to velocity-triangle design, transient CFD results, benchmark comparison, and flow-field mechanisms. The numerical model was assessed through mesh independence, time-step independence, analytical benchmark comparison, and comparison with relevant literature. The reported efficiency is therefore interpreted as runner-domain hydraulic efficiency rather than complete electro-mechanical system efficiency. The optimum L/H ratio of 0.5 achieved 81.80% hydraulic efficiency and 210.07 W mechanical power at 600 rpm under a 3 m head. This performance is associated with a favourable pressure difference, smoother streamlines, and delayed separation, whereas the thickest blade (L/H of 1.5) produced stronger blockage, recirculation, and efficiency reduction to 56.31%. The results provide design guidance for locally manufacturable pico-hydro crossflow turbines and establish a basis for future prototype validation and field installation in remote Indonesian communities.
No takes yet. Share an insight, caveat, or question.
Sari et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: