Answers are grounded in this paper and cite their sources.
This paper deals with the design of a suitable microreactor for the catalytic oxidation of volatile organic compounds (VOCs). There are a number of ways to release VOCs into the atmosphere, typically during processing of natural and handling petroleum products. As VOCs are harmful to our health, there is increased scientific interest in technologies for their destruction. Catalytic oxidation is one of them. Microreactors have showed higher than the conventional ones, mainly due to their large surface area to volume ratio and excellent heat and transfer properties. The design of a microreactor can be explored based on simulation results obtained by using fluid dynamics (CFD) package of COMSOL Multiphysics. The first design step, based on cold flow , was the selection of the most suitable microreactor geometry and configuration. Four different geometries been proposed and simulated to evaluate the fluid behaviour in the microchannels. One of them, Type A2, allowed most uniform flow distribution in all channels, as assessed through relative standard deviation calculations. The design step involved the investigation of the VOCs catalytic oxidation, using propane as model molecule, in the microreactor with the geometry/configuration previously found. The proposed microreactor consists eleven parallel channels of square cross-section, with 0.5 × 10-3 m width, 0.5 × 10-3 m height and 0.1 m length. The microreactor was simulated for temperatures between 563 K and 663 K and inlet flow velocities from 0.01 to 1.00 m·s-1. The exit propane conversion increased rapidly with increasing temperature for a fixed inlet flow velocity. a fixed temperature, the propane conversion increased as the inlet flow velocity decreased.
No takes yet. Share an insight, caveat, or question.
Odiba et al. (2016) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: