Answers are grounded in this paper and cite their sources.
To understand the influence of P-containing compounds on particulate matter (PM) emissions from the combustion of agricultural residues, the combustion of cornstalk was performed with the addition of a phosphorus-based additive, namely, ammonium dihydrogen phosphate (NH4H2PO4), in a fixed-bed combustion system. Simultaneously the ash samples, including PM collected by a Dekati low-pressure impactor (DLPI) and residual ash, were analyzed with variant analytical techniques. It was found that NH4H2PO4 addition significantly reduced PM0.1 and PM0.1–1 yields but increased PM1–10 yields. The maximum PM0.1 and PM1 reduction efficiency can reach up to 50% at an optimal P/K molar ratio equal to 1. Meanwhile, the addition of NH4H2PO4 to cornstalk changed the chemical composition of PM1 from being dominated by KCl and KOH/K2CO3 with a small amount of K2SO4 to a system dominated by KPO3 and KCl with a small amount of K2SO4. Simultaneously, the possible PM1 reduction mechanism was proposed. In addition, the residual ash after combustion was rich in K- and P-containing species, indicating a potential utilization as a fertilizer. It showed that the addition of NH4H2PO4 is a promising approach to reduce PM1 emissions during the combustion of agricultural biomass.
No takes yet. Share an insight, caveat, or question.
Zhu et al. (2019) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: