Answers are grounded in this paper and cite their sources.
Demonstrates enhanced ionic conductivity in large-area electrochromic devices using a new polymer electrolyte, suggesting potential for commercial applications.
Polyvinyl butyral (PVB) is a well‐established polymer interlayer material that has been used in laminated safety glass panels for over 80 years. However, its intrinsically poor ionic conductivity (σ) severely restricts its widespread application as a solid polymer electrolyte (SPE) for laminated WO 3 –NiO electrochromic devices (ECDs). Here, a new strategy for significantly improving the σ of PVB via a cross‐linking reaction with 3‐glycidoxypropyltrimethoxysilane (KH560) is presented. The cross‐linked PVB‐SPE with 10 wt.% KH560 exhibits the highest room‐temperature σ value among the investigated samples (1.51 × 10 −4 S cm −1 ), which is also higher than that of previously reported PVB‐based SPEs (10 −5 –10 −7 S cm −1 ). Additionally, the prepared SPE exhibits comprehensive optical, mechanical, and thermal performances, including a high visible transmittance (>91%), relatively high adhesive strength (2.13 MPa), and superior thermal stability (up to 150 °C). Laminated WO 3 –NiO ECDs with dimensions of 5 × 5 cm 2 and 20 × 20 cm 2 , fabricated by leveraging the aforementioned properties of the electrolyte, operate stably at temperatures ranging from −20 to 80 °C, underscoring the potential of the PVB‐SPE for realizing commercially viable large‐area ECDs.
No takes yet. Share an insight, caveat, or question.
Wang et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: