Answers are grounded in this paper and cite their sources.
Mn-WO 3 /TiO 2 catalysts were investigated for Selective Catalytic Reduction (SCR) of NO with NH 3 . The catalysts were synthesized by wetness impregnation method with different Mn loadings (1.5-3-12 wt%) on 8wt%WO 3 /TiO 2 . All three catalysts were compared with 8wt%WO 3 /TiO 2 and bare MnO x oxide, used as references. The 1.5wt%Mn-8wt%WO 3 /TiO 2 exhibited the highest performance in NO conversion and N 2 selectivity. A commercial catalyst, based on titania supported vanadia and tungsta, (V 2 O 5 -WO 3 /TiO 2 ), widely used for its high efficiency, was also investigated in the present work. The morphological, structural, redox and electronic properties of the catalysts and their thermal stability were studied by several techniques (N 2 adsorption/desorption, X-ray diffraction, H 2 temperature-programmed reduction, NH 3 temperature programmed desorption, X-ray photoelectron spectroscopy). The aim of this paper is to study the effect of different Mn loadings on 8wt%WO 3 /TiO 2 with the ambition to obtain highly active and selective catalysts in a large window of temperature. The replacement of toxic vanadium used in the classic V 2 O 5 -WO 3 /TiO 2 catalyst with MnO x in the best performing catalyst, 1.5wt%Mn-8wt%WO 3 /TiO 2, represents an important achievement to improve the environmental sustainability.
No takes yet. Share an insight, caveat, or question.
Consentino et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: