Answers are grounded in this paper and cite their sources.
Various kinetic models of methanol dehydration to dimethyl ether over a commercial γ‐alumina catalyst were compared with a view to selecting the most appropriate model as a basis for process optimization. To achieve significant improvements in the conventional design, the Berčič‐and‐Levec kinetic model was employed and process intensification was applied to develop a more energy‐efficient process, by enhancing the adiabatic reactor performance and maximizing the heat recovery from the highly exothermic reactor. The single‐pass conversion of methanol was increased to 83 %, with an inlet temperature of 217 °C to the adiabatic reactor. Application of process intensification resulted in an improved flowsheet, which reduced the total energy requirements by 59.3 % and cut the CO 2 emissions by 60.8 %.
No takes yet. Share an insight, caveat, or question.
Al-Rabiah et al. (2021) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: