Key points are not available for this paper at this time.
Abstract Electromagnetic interference (EMI) shielding materials with excellent flexibility and mechanical properties and outstanding thermal conductivity have become a hot topic of research in functional composites. In this study, the “sol–gel‐film conversion technique” is used to assemble polyetherimide‐functionalized Ti 3 C 2 T x nanosheets ( f ‐Ti 3 C 2 T x ) with poly( p ‐phenylene‐2,6‐benzobisoxazole) (PBO) nanofibers (PNFs), followed by dialysis and vacuum drying to prepare f ‐Ti 3 C 2 T x /PNF films with lamellar structures. When the loading of f ‐Ti 3 C 2 T x is 70 wt%, the f ‐Ti 3 C 2 T x /PNF film presents optimal comprehensive properties, with an EMI shielding effectiveness (SE) of 35 dB and a specific SE/thickness ((SSE, SE/density)/ t ) of 8211 dB cm 2 /g, a tensile strength of 125.1 MPa, an in‐plane thermal conductivity coefficient ( λ ) of 5.82 W/(m K), and electrical conductivity of 1943 S/m. After repeated folding for 10,000 cycles, the EMI SE and the tensile strength of f ‐Ti 3 C 2 T x /PNFs films still remain 33.4 dB and 116.1 MPa, respectively. Additionally, the f ‐Ti 3 C 2 T x /PNF film also shows excellent thermal stability, flame retardancy, and structural stability. This would provide a novel method for the design and fabrication of multifunctional composite films and considerably expand the applications of MXene‐ and PNF‐based composites in the fields of EMI shielding and thermal management.
Wang et al. (Mon,) studied this question.